 |
| Zebra Light H31 Headlamp |
Zebra Light H31 Headlamp
Main Features and Specifications
-
LED: Cree XP-G Cool White (color temperature 6100-6500 K)
-
User Selectable Modes: 3 (High, Medium and Low). Each mode can be configured to one of the two sub-levels.
- Light Output
- High: H1 220 Lm (0.9 hrs) or H2 120 Lm (2 hrs) / 4Hz Strobe
- Medium: M1 43 Lm (12 hrs) or M2 24 Lm (23 hrs)
- Low: L1 5 Lm (3.7 days) or L2 0.5 Lm (21 days)
- Light output are out the front (OTF) values. Runtime tests are done using Panasonic CR123A lithium batteries. Runtimes are usually much shorter with rechargeable RCR123 (16340) batteries, especially with protected 16340s that have higher discharge cut off voltage.
- Battery: One CR123A lithium primary or RCR123 Li-ion rechargeable. Batteries are not included in the package.
-
Battery Shelf Life: Over 3 years under parasitic drain
- Beam Type
- 80 degree spill beam spread
- 11 degree (3.8 feet at 20 feet) hot spot
- Dimensions
- Diameter: 0.90 inch (23 mm)
- Length: 2.57 inch (65 mm)
- Weight
- 0.97 oz (27.6 gram) without battery or headband
- Features
- Electronic soft-touch switch, with a 200,000 cycle operating life
- Smart user interface provides fast and easy access to all brightness levels
- Precision machined casing from premium grade Alcoa aluminum bar stock
- Durable natural hard anodized finish (Type III Class I)
- Ultra clear lens with anti-reflection coatings on both sides
- Orange peel textured reflector
- Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8
Operations
This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
-
Basic Operation
- Advanced Operation and Configuration
-
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
- Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
-
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
-
The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.
Accessories in the package
FREE SHIPPING
SHIPS 1/15/2012 |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $64.00 |
|
| |
|
|
|
|
 |
| Zebra Light H51Fw Headlamp |
Zebra Light H51Fw Headlamp
Main Features and Specifications
-
LED: Cree XP-G Neutral White (color temperature 4200 K)
-
User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
- Light Output
-
Operating Voltage Range: 0.7V - 2.5V
-
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
-
Parasitic Drain: Negligible (equivalent to 16 years)
- Beam Type
- Floody beam from frosted lens, with 90 degree beam spread
- Dimensions
- Diameter: 0.90 inch (23 mm)
- Length: 3.2 inch (81 mm)
- Weight
- Features
- Electronic soft-touch switch, with a 200,000 cycle operating life
- Smart user interface provides fast and easy access to all brightness levels
-
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
-
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
- Durable natural hard anodized finish (Type III Class I)
- Tempered optical grade ground glass
- Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8 (2 meters, 30 minutes)
Operations
This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
-
Basic Operation
- Advanced Operation and Configuration
-
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
- Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
-
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
-
The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.
Accessories in the package
FREE SHIPPING |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $64.00 |
|
| |
| |
|
|
|
 |
| Zebra Light H600 Headlamp |
Zebra Light H600 Head Lamp (Headband Included)
Main Features and Specifications
-
LED: Cree XM-L Cool White (Norminal CCT 6300K)
-
User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High (H2) can be further configured to different brightness levels or strobes.
- Light Output
-
High: H1 420Lm with 750Lm turbo in the first 3 min (2.3 hrs) or H2 170Lm (7 hrs) / 270Lm (4 hrs) / 420Lm (2.4 hrs) / 4Hz Strobe
- Medium: M1 65Lm (18 hrs) or M2 21Lm (50 hrs)
- Low: L1 2.8Lm (280 hrs) or L2 0.1Lm (80 days)
-
Runtimes are tested using Panasonic NCR18650 (2900mAH) batteries. Light output are out the front (OTF) values. All levels are current regulated.
-
Operating Voltage Range: 2.7V - 4.2V
-
Battery: One 18650 size (up to 67mm long) 3.6/3.7V Li-ion rechargeable battery. Batteries are not included in the package.
-
Parasitic Drain: Negligible (equivalent to 12 years)
- Beam Type
- 80 degree spill
- 12 degree hot spot
- Dimensions
- Weight
- Features
-
Automatic stepping down from High to Medium, and from Medium to Low when the battery capacity is low
-
Builtin over-discharging protection with 2.7V cutoff
-
Electronic soft-touch switch
- Smart user interface provides fast and easy access to all brightness levels
-
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
-
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to most of the surface area.
- Durable natural hard anodized finish (Type III Class I)
- Ultra clear lens with anti-reflection coatings on both sides
- Orange peel textured reflector
- Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8 (2 meters, 30 minutes)
Operations
This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
-
Basic Operation
- Advanced Operation and Configuration
-
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
- Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
-
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
-
The second sub-level of the High can be configured after 6 double clicks. Double click (startng with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes.
Accessories in the package
FREE SHIPPING
Battery Recomendation: Panasonic NCR18650 (2900mAH) batteries
|
| |
| Base SKU: |
| In Stock:Yes |
| Price: $89.00 |
|
| |
|
|
|
|
 |
| Zebra Light SC51 Flashlight |
Zebra Light SC51 Flashlight
Main Features and Specifications
-
LED: Cree XP-G Cool White (color temperature 6100-6500 K)
-
User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
- Light Output
-
Operating Voltage Range: 0.7V - 2.5V
-
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries are not supported. Batteries are not included in the package.
-
Parasitic Drain: Negligible (equivalent to 16 years)
- Beam Type
- 80 degree spill beam spread
- 11 degree (3.8 feet at 20 feet) hot spot
- Dimensions
- Diameter: 0.85 inch (22 mm)
- Length: 3.15 inch (80 mm)
- Weight
- Features
- Electronic soft-touch switch, with a 200,000 cycle operating life
- Smart user interface provides fast and easy access to all brightness levels
-
Precision machined unibody casing from premium grade Alcoa aluminum bar stock
-
Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing, providing unblocked thermal paths to over 94% of the surface area.
- Durable natural hard anodized finish (Type III Class I)
- Ultra clear lens with anti-reflection coatings on both sides
-
Bezel down clip (pre-installed)
-
Can be used as a headlamp with the included headband
-
Orange peel textured reflector
-
Anti-roll and tail-standing capable
- Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
- Waterproof to IPX8 (2 meters, 30 minutes)
Operations
This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.
-
Basic Operation
- Advanced Operation and Configuration
-
Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
- Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
-
Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
FREE SHIPPING |
| |
| Base SKU: |
| In Stock:Yes |
| Price: $64.00 |
|
| |
|
|
|
|
